In order to maintain the good condition of the sawing machine, regular maintenance of the metal band sawing machine is required. After the daily work is completed, remove the iron filings that have accumulated on the machine. Stop the saw belt from turning, turn on the cooling water switch, and use a cooling water spray gun to clean the workbench. After clearing, lower the saw to the lowest position.
1. Daily maintenance
Before operating a metal band saw, check it according to the following procedure:
1.1 Check the hydraulic oil meter. Does the hydraulic oil volume exceed the red line??
When the hydraulic oil is lower than the L red line, you need to add an appropriate amount of No. 32 anti-wear hydraulic oil.
1.2 Check whether the coolant water meter exceeds the red line. When the cooling water is lower than the L red line, you need to add an appropriate coolant liquid;
1.3 Check whether the saw belt is located between the left and right saw belt wheels and the front and rear tungsten steel guides;
1.4 Check whether the wire brush is located at the root of the saw tooth;
1.5 Add mechanical oil to the movable clamp guide rail of the bed;
1.6. Add mechanical oil to the guide rails of the floating clamps of the feeding bed.
2. Monthly maintenance
2.1. The grease nozzle of the tension slider is filled with grease with an oil gun;
2.2. Grease the grease nozzle of the passive wheel with a grease gun;
2.3. Inject grease with an oil gun from the oil filler of the active wheel;
2.4. The grease nozzle of the steel brush transmission base is filled with grease with an oil gun;
2.5, the gear box 2 grease nozzles with a grease gun to inject grease;
3. Six-month maintenance
The new metal band sawing machine has been in use for the first 6 months. To keep the sawing machine in good working condition, please replace:
3.1 Gear oil in gear box;
3.2, hydraulic oil tank hydraulic oil;
4. Annual maintenance
The metal band sawing machine has been in use for one year. To keep the sawing machine in good working condition, please replace:
4.1. Gear oil in gear box;
4.2. Hydraulic oil tank hydraulic oil;