Steel strip shot blasting machine is a special equipment for steel strip continuous production line. Through the shot blasting to remove the surface of the strip of oxide, rust.
Strip materials and product conditions
1. Coil status
Steel strip type: Q235A/B
Strip thickness: 3.0 ～13.0mm
Strip width: 1000 ～20 00mm
Strip temperature: room temperature
Raw materials: From the hot-rolled coil
2. Production capacity
3. Common media conditions
Power Supply System
● Power supply: 380VAC，－ 10% ～＋ 15% ； 50Hz±1Hz
● Operate the power supply: 220VAC， 24VDC
● Solenoid valve power: DC24V
● Dry oil-free compressed air, pressure: 0.5～0.6Mpa
● Consumption: 15 m3/min
Workpiece Cleaning Order
Strip feeding → Shot blasting → High-pressure blower to purge the abrasive →Strip unloading
Abrasive Recycling Process
Abrasive Storage → Flow Control → Shot Blasting →Screw conveyor Horizontal Transport → Bucket elevator Lift →Separation → Abrasive Storage
Dust Treatment Process
Room dust and separator dust → Butterfly valve air volume control →Inertial dust collector → Bag filter → Fan → Exhaust air.
The machine with PLC electrical control, pneumatic valve air cylinder control, abrasive controllable gate and abrasive cycle fault detection device to achieve automatic machine control, which has high productivity, reliability and advanced degree of automation and soon.
1. Installation and commissioning issue: We will send one technician to assist with machine installation and commissioning, customer pays for their tickets, hotel and diet.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.